Wenzhou Kingpak Manufacturing Co., Ltd.
Main products:Printer
Products
Contact Us
  • Contact Person : Mr. King Tiger
  • Company Name : Wenzhou Kingpak Manufacturing Co., Ltd.
  • Tel : 86-577-88377908
  • Fax : 86-577-88360028
  • Address : Zhejiang,Wenzhou,Room 503, Building 1, Jinrun Flower Garden, Station Avenue
  • Country/Region : China
  • Zip : 325000

Aging Tank (Cooling and heating tank, Open type Mixing Tank)

Aging Tank (Cooling and heating tank, Open type Mixing Tank)
Product Detailed
It has heating, cooling, heat, stirring, aging and other functions.

Aging Tank (Cooling and heating Pot, Open type Mixing Tank)

Overview:

Aging Tank (Cooling and heating Pot) is a clean and hygienic container with equipment, with heating, cooling, insulation, agitation and other functions. Milk, ice cream, ice cream and other cold drinks in the necessary process of aging equipment. Widely in the dairy industry, food, pharmaceutical, chemical, beverage and other industrial sectors.

Category:

By heating medium can be divided into: steam type, hot water type, electric heating

 type.

Out by the material can be divided into: open-type, close-type.

According to the structure can be divided into: general type, the upper and lower cone, the upper and lower head.

Structure:

The equipment consists of inner, middle jacket, insulation layer, cladding, reducer, stirring paddle, thermometer and so on.

Inner: 304 stainless steel plate material, surface finish.Middle Jacket: The A3 steel or 304 stainless steel plate to strengthen the circle spiral devices, cold water from the bottom up (no pressure) to achieve the best lift and cooling effect.Insulation layer: made of stainless steel plate, with a polyurethane or glass wool insulation to keep the temperature of the outside world, to the effect of thermal insulation.Reducer: Cycloid reducer, fixed in the beams of the bracket, gear wheel and the impeller shaft connection, the use of loop connection for easy disassembly and cleaning.Thermometer: Specifications 0 °c ~ 100 °c, install the beams, the minimum for straight medium, and make the liquid material used in the lowest position can also indicate the temperature, to achieve sterilization and aging purposes.

Technical parameters:

Nominal Volume (L)

300

500

600

900

1000

1500

2000

3000

5000

Inner Diameter (mm)

800

900

900

1000

1100

1300

1400

1600

1800

Heating area (m²)

1.6

3

3.5

4

4.5

5

7.5

10

13

Motor Power (kw)

0.55

0.75

0.75

1.1

1.1

1.5

1.5

2.2

3

Agitator Speed

36r/min

Working Pressure

Jacket :0.08-0 .3 Map, Inner: Normal Pressure-0.25Mpa

Operating Temperature (°c)

Jacket: 138°c, Inner: <132°c

Application

Aging Tank (Cooling and heating tank, Open type Mixing Tank)



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.